
Greetings darklings:
Let the countdown begin! The countdown to Samhain ..
I signed up for MasterWriter. I will try it and see what I think. I am impressed with it so far. Last night, I was just out on an what I would call- Unsought for Adventure. We went on this brutal terrain trail. We had never done it before. The light was gone quick. We got lost. Spruce tree branches barred the way ahead or whipped my face. We relied on Derrick’s cell phone light. We fought our way over rough rocks, huge tree branches, roots, massive uprooted tree roots, marsh. It was nasty. We were lost when the gods above decided to send us an angel along with his sweet, white, four-footed shaggy companion – a darling dog named Jericho. She was so sweet. Jack and Jericho helped us find our way back to the path and to the parking lot. Never again. Penny is so relieved to see me- I am the provider. We would have been fucked if it were not for Jack. We planned originally to make our way back to the car within 20-30 minutes. We are okay now and about to enjoy hamburgers. We did not see any wildlife that wanted to eat us. I am so relieved to be back. I took a hot shower for my achy bones. Saved by Jack and his sweet shaggy dog.
I have decided to sew a witchy dress for The Witches Ball, and to wear all the time. The dress will be simple, witchy and elegant. I want to save as much money to make it as possible. I may have mentioned this in a previous post. I have gathered all the pdf paper pieces – 95 of them, to be exact, and cut most of it out. It took me three hours to arrange the patterns today and I was still not finished. I was so close to being done, but the creative room at the library was closing. I will return next time it is available and this time, I will bring the black bedsheet. I know you want to scoff or laugh, but I just don’t have the budget for tons of fabric. I have to be frugal. The front and back of the dress will be simple and elegant, and the sleeves will make the statement.
The Lou Duggan Creative Studio is my creative home away from home. I love it there. I am always there. I can do any creative project I desire. I could do it at home, but I most certainly do not have the room to make my projects. This dress, for example, is a huge pattern project. I mean it is too big, it is unreal.
If I have enough fabric left from cutting the body of the dress and the ruffles, then I would not need to buy black cotton from the fabric store. I really hope I don’t have to. The black bedsheet is cotton fabric and not being used. Why not? The sleeves will be expensive. The bedsheet is a queen size and I need almost 4 meters of fabric, 3.9. I may have enough. The sleeves will be made from black velvet and organza. I was going to use chiffon, but changed my mind. I will also use an elastic casing and interfacing to give it stability. I have to wait to buy the rest of the sleeve material, but it will be worth the wait. Then, the spiderweb lace on the sleeves and maybe the collar. I want to sew on a double ruffle at the hem of the dress. I think it will be beautiful. The elastic casing is for the two sections of the upper and lower sleeves. I want to use the arwen pattern for the lower sleeves, even though the pattern does not call for that. It is my dress and I have enough sewing experience that an alteration like that will be easy to do. I think that will be far more feminine.
Update on the dress: Bless my broomsticks, but it was not easy. I did end up buying black fabric for the dress and it drapes well. It is perfect for the dress.
Ok. I cut out all the fabric pattern pieces at the library. I had to drag the pattern pieces to the fabric store to know how much fabric to buy. The pattern said 3.9 and for the body of the dress, I did 4.2. That may or may not include the sleeves. Ok so I thought I got enough fabric. My sewing machine at home jammed on me 3 times… the troubles rolled on from there
I had to go back to the store for more fabric. Again and again and again – more velvet, more bias tape, more ribbon
I finally learned how to thread the needle and bobbinn PROPERLY
I sewed the sleeves. I wanted to add the organza lower hem ruffle to the lined upper velvet sleeve.. and realized the organza was too delicate to handle it alone. I realized that at the library and fixed it at home.
I added the velvet to one sleeve ruffle – on the inside – wrong side of the sleeve
I sewed the ruffle to the lower hem of the dress and the guy at the library thought it would be funny if the stitch width was so miniscule as to be impossible to even see- I sewed the ruffle to the dress – wrong side showing up on the right side of the dress. I had to seam rip all those teeny tiny stitches. Ugh
I pinned and sewed the ruffle on again and realized the stitches never went in. I had to do it all over again a third time. I did it, but then a seam bulged because the ruffle has to be gathered in.
I sewed in bias tape to the neckline. Then I added the trim. That stabilized the neckline. No facing.
The seam ripper was so sharp it put holes in the fabric which can be fixed
Before I learned how to thread the bobbin and the needle, I tried to see if they could fix the machine at the library. They did not. Ugh
I used buckram for the first time for the witch hat. It is white. The witch hat is black velvet. I have to attach more trim to conceal spots where the white buckram shows. Then work in the millinery wire
My sewing machine acted like a diva. I tried the dress on and it pulls a little on the upper arm area, but it is otherwise okay.
Attaching the lower sleeve ruffle to the upper sleeves was a brutal lesson in itself. Always right sides together.
From bobbins being empty at the so wrong moment, to me being stabbed by pins, to me losing my temper over fabric refusing to obey me, to the machine jamming till I finally found a video that showed me how to thread it properly, to installing a new sewing needle, to endless seam ripping, to trips back and forth from the library with fabric bags, to hauling huge pattern pieces to the fabric store and back, it has been an unbelievable experience.
I figured out the lower sleeve ruffle construction to fit the upper sleeve cap. I had to sew the organza to the velvet and gather it from 22 inches to 14 inches. Ugh I even used a measuring tape. But the sleeves are great now and beautiful. Tomorrow I have to add the organza to the ruffle on the right side of the fabric. It was not sewn in. I snipped endless amounts of black threads. Thankfully, I changed my mind about the elastic casing (sleeves), not needed.
I sewed one sleeve ruffle to the upper sleeve cap then discovered it was possible to do on a machine. It was not easy
Before I learned how to properly thread the bobbin and needle, I threaded the needle like ten times, removed the steel plate with whatever tool I could find and checked it 3 or 4 times (and cleaned it up) , and threaded the bobbin a few times. Screamed. Gnashed my teeth. The print manual was useless. I finally found videos that showed me ! I even believed my machine needed to be serviced. Nope. It was the tension.
I kept checking my tension on scrap pieces.
I stitched together the sleeve pieces for the upper sleeve cap and stupid me, thought I was being clever: I left a spot to turn the sleeve out so raw edges would not show. Nope! I found out the hard way that was wrong. I sewed the part closed where it was open, then had to seam rip and turn my fabric wrong side out and then seam rip it all and then found the right way to put the velvet, organza and the lining together correctly. Ugh.
Then i found out the machine did not like the fragile spiderweb lace. Ok do it by hand on the lower sleeve ruffles. ugh
I finally learned which stitch tension and stitch width was good for sewing the black polyester fabric. 9 pattern, 3 mm stitch width and #5 tension. !!!!!
At least it went well when I sewed the whole sleeves into the dress and the bias tape and the neckline.
The back neckline looks lower than the front neckline or it could just be the dress form
One sleeve looks higher than the other or it could just be the dress form
I made sure to line up the seam on the lower sleeve ruffle with the seam on the upper sleeve cap. It is always so much nicer when the sleeve seams match!!
I thought I fixed the part where the fabric pushed out at the side seam and the lower hem ruffle. The fabric just looked puckered badly. I seam ripped it all and a way up the side of the dress and then pinned and sewed it and it looks better, but I think that since the side seam of the ruffle is near the side seam of the dress, if I open just that part of it again, and then see how it hangs and pin it and maybe tuck or gather the fabric in, that it might just go into place.
… what an experience.
I can’t wait to see it on my dress form. I am sure it will be beautiful! I have to touch up a few spots where the seam ripper poked holes in the fabric and sew the organza ruffle to the hem and gather it in. I will return to the Lou Duggan Creative Studio tomorrow morning. I just want to be done with the project. I can’t wait to see the dress on my dress form- and on me, too!
My Witch hat is almost finished too!
Till next time…
Blessings, Spiderwitch )O(